Lenovo S510, Hardware Maintenance Manual

Page: 67 / 142

• If you want to save the new settings, press the F10 key. Then, select Yes in the window displayed
and press Enter.
Note: For some keyboards, you might need to press Fn+F10 to exit the Setup Utility program.
• If you do not want to save the new settings, select Exit
➙
Discard Changes and Exit and press Enter.
Then, select Yes in the window displayed and press Enter.
Updating the BIOS
When you install a new program, hardware device, or device driver, you might be informed to update
the BIOS. You can update the BIOS from your operating system or a flash update disc (supported only
on some models).
To update the BIOS, do the following:
1. Go to http://www.lenovo.com/drivers.
2. Download the flash BIOS update driver for the operating system version or the ISO image version (used
to create a flash update disc). Then, download the installation instructions for the flash BIOS update
driver you download.
3. Print the installation instructions you download and follow the instructions to update the BIOS.
Note: If you want to update the BIOS from a flash update disc, the installation instructions might not provide
the information about how to record the update disc. See “Using a disc” on page 41.
Chapter 6
.
Advanced configuration
61