Lenovo RackSwitch G8332, Command Reference Manual

Page: 57 / 776

© Copyright Lenovo 2016 Chapter 2: Information Commands
57
FDB Multicast Information
The following commands display FDB multicast information.
show mac ­ address ­ table state {unknown|forward|trunk}
Displays all FDB entries for a particular state.
Command mode: All
show mac ­ address ­ table static
Displays all static unicast MAC entries in the FDB.
Command mode: All
show mac ­ address ­ table vlan
<VLAN ID (1 ‐ 4094)>
Displays all FDB entries on a single VLAN.
Command mode: All
Table 21.
FDB Information Options (continued)
Command Syntax and Usage
Table 22.
Multicast FDB Information Options
Command Syntax and Usage
show mac ­ address ­ table multicast
Displays all Multicast MAC entries in the FDB.
Command mode: All
show mac ­ address ­ table multicast address
<MAC address>
Displays a single multicast entry by its MAC address. You are prompted to
enter the MAC address of the device. Enter the MAC address using the format,
xx:xx:xx:xx:xx:xx
. For example,
08:00:20:12:34:56
.
You can also enter the MAC address using the format,
xxxxxxxxxxxx
.
For example,
080020123456
.
Command mode: All
show mac ­ address ­ table multicast interface port
<port alias or number>
Displays all multicast entries for a particular port.
Command mode: All
show mac ­ address ­ table multicast vlan
<VLAN ID (1 ‐ 4094)>
Displays all multicast entries on a single VLAN.
Command mode: All