Lenovo RackSwitch G8332, Command Reference Manual

Page: 382 / 776

382
G8332 Command Reference for ENOS 8.4
System Access Configuration
The following table describes the System Access commands.
Table 165.
System Access Configuration Options
Command Syntax and Usage
[no] access http enable
Enables or disables HTTP (Web) access to the Browser ‐ Based Interface.
The default settings is
enabled
.
Command mode: Global configuration
access http port
<TCP port number (1 ‐ 65535)>
Sets the switch port used for serving switch Web content.
The default is HTTP port
80
.
Command mode: Global configuration
default access http port
Resets the HTTP port to the default port number ‐
80
.
Command mode: Global configuration
access snmp {read ­ only|read ­ write}
Enables read ‐ only/write ‐ read SNMP access.
Command mode: Global configuration
no access snmp
Disables SNMP access.
Command mode: Global configuration
[no] access telnet enable
Enables or disables Telnet access.
The default setting is
enabled
.
Command mode: Global configuration
access telnet port
<TCP port number (1 ‐ 65535)>
Sets an optional Telnet server port number for cases where the server listens
for Telnet sessions on a non ‐ standard port.
Command mode: Global configuration
default access telnet port
Resets the Telnet server port to the default port number ‐
23
.
Command mode: Global configuration
access tftp ­ port
<TCP port number (1 ‐ 65535)>
Sets the TFTP port for the switch.
The default is port
69
.
Command mode: Global configuration