Lenovo RackSwitch G8264CS, Cli Command Reference

Page: 399 / 702

© Copyright Lenovo 2017 Chapter 4: Configuration Commands
399
Management ACL Configuration
These commands allow you to define filtering criteria for each management ACL
(MACL).
Note:
Management ACLs (MACLs) are not supported on the management port,
only on data ports. Management ACLs filter traffic received through data
interfaces only. Management interface is not monitored.
MACL IPv4 Filtering Configuration
These commands allow you to define IPv4 matching criteria for an MACL.
Table 204.
MACL Configuration Options
Command Syntax and Usage
access ­ control macl
<1 ‐ 128>
action {permit|deny}
Configures a filter action for packets that match the MACL definitions. You
can choose to permit (pass) deny (drop) packets.
Command mode: Global configuration
[no] access ­ control macl
<1 ‐ 128>
enable
Enables or disables the management ACL.
Command mode: Global configuration
[no] access ­ control macl
<1 ‐ 128>
statistics
Enables or disables the statistics collection for the MACL.
Command mode: Global configuration
show access ­ control macl
<1 ‐ 128>
Displays the current MACL parameters.
Command mode: All
Table 205.
IP version 4 Filtering Configuration Options
Command Syntax and Usage
access ­ control macl
<1 ‐ 128>
ipv4 destination ­ ip ­ address
<IP address>
[
<IP mask>
]
Defines a destination IP address for the MACL. If defined, traffic with this
destination IP address will match this MACL.
Command mode: Global configuration
no access ­ control macl
<1 ‐ 128>
ipv4 destination ­ ip ­ address
Deletes the configured destination IP address for the specified MACL.
Command mode: Global configuration