Lenovo RackSwitch G8264CS, Cli Command Reference

Page: 150 / 702

150
G8264CS Command Reference for ENOS 8.4
RMON Event Information
The following command displays RMON event information:
show rmon event
Command mode: All
The following table describes the RMON Event Information parameters.
rEvtIdx Displays the rising alarm event index that is triggered when a rising
threshold is crossed.
fEvtIdx Displays the falling alarm event index that is triggered when a
falling threshold is crossed.
OID Displays the MIB Object Identifier for each alarm index.
Owner Displays the owner of the alarm instance.
Table 69.
RMON Alarm Parameter Descriptions (continued)
Parameter Description
RMON Event group configuration:
Index Type Last Sent Description
­­­­­ ­­­­ ­­­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
1 both 0D: 0H: 1M:20S Event_1
2 none 0D: 0H: 0M: 0S Event_2
3 log 0D: 0H: 0M: 0S Event_3
4 trap 0D: 0H: 0M: 0S Event_4
5 both 0D: 0H: 0M: 0S Log and trap event for Link Down
10 both 0D: 0H: 0M: 0S Log and trap event for Link Up
11 both 0D: 0H: 0M: 0S Send log and trap for icmpInMsg
15 both 0D: 0H: 0M: 0S Send log and trap for icmpInEchos
Index Owner
­­­­­ ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
1 dan
Table 70.
RMON Event Parameter Descriptions
Parameter Description
Index Displays the index number that identifies each event instance.
Type Displays the type of notification provided for this event, as
follows:
none
,
log
,
trap
or
both
.
Last sent Displays the time that passed since the last switch reboot, when
the most recent event was triggered. This value is cleared when
the switch reboots.
Description Displays a text description of the event.
Owner Displays the owner of the alarm instance.