Lenovo RackSwitch G8264, Command Reference Manual

Page: 558 / 794

558
G8264 Command Reference for ENOS 8.4
OSPFv3 Host Entry Configuration
The following table describes the OSPFv3 Host Entry commands.
no area ­ virtual ­ link
<1 ‐ 3>
encryption ipsec spi
<256 ‐ 4294967295>
Disables the specified Encapsulating Security Payload (ESP) SPI.
Command mode: Router OSPF3
area ­ virtual ­ link
<1 ‐ 3>
encryption ipsec default
Resets the IPsec encryption configuration to its default values.
Command mode: Router OSPF3
show ipv6 ospf area ­ virtual ­ link
Displays the current OSPFv3 virtual link settings.
Command mode : All
Table 295.
Layer 3 IPsec Configuration Options (continued)
Command Syntax and Usage
Table 296.
OSPFv3 Host Entry Configuration Options
Command Syntax and Usage
host
<1 ‐ 128>
address
<IPv6 address> <prefix length (1 ‐ 128)>
Configures the base IPv6 address and the subnet prefix length for the host
entry.
Command mode : Router OSPF3
host
<1 ‐ 128>
area
<0 ‐ 2>
Configures the area index of the host.
Command mode : Router OSPF3
host
<1 ‐ 128>
cost
<1 ‐ 65535>
Configures the cost value of the host.
Command mode : Router OSPF3
[no] host
<1 ‐ 128>
enable
Enables or disables the host entry.
Command mode : Router OSPF3
no host
<1 ‐ 128>
Deletes the host entry.
Command mode : Router OSPF3
show ipv6 ospf host [
<1 ‐ 128>
]
Displays the current OSPFv3 host entries.
Command mode : All