Lenovo RackSwitch G8264, Command Reference Manual

Page: 522 / 794

522
G8264 Command Reference for ENOS 8.4
Network Filter Configuration
The following table describes the Network Filter commands.
Table 272.
IP Network Filter Configuration Options
Command Syntax and Usage
ip match ­ address
<1 ‐ 256> <IP address> <IP netmask>
Sets the starting IP address and IP Netmask for this filter to define the range of
IP addresses that will be accepted by the peer when the filter is enabled.
The default address is
0.0.0.0 0.0.0.0.
Command mode: Global configuration.
[no] ip match ­ address
<1 ‐ 256>
enable
Enables or disables the Network Filter configuration.
Command mode: Global configuration
no ip match ­ address
<1 ‐ 256>
Deletes the Network Filter configuration.
Command mode: Global configuration
show ip match ­ address [
<1 ‐ 256>
]
Displays the current the Network Filter configuration.
Command mode: All