Lenovo P70, User Manual

Page: 51 / 184

starts automatically and the green camera status indicator turns on. For more information about using the
camera with a program, see the help information system of the program.
Configuring camera settings
You can configure the camera settings to meet your needs, such as adjusting the quality of the video output.
To configure the camera settings, do the following:
• For Windows 7 : Start the Communications Utility program and configure the camera settings as desired.
• For Windows 10 : Do one of the following:
– Open the Camera app, and click the settings icon in the upper-right corner. Follow the instructions on
the screen to configure the camera settings as desired.
– Open the Start menu and then click Lenovo Companion ➙ Hardware Settings ➙ Display, Camera &
Audio/Media . Locate the Camera section and then follow the instructions on the screen to configure
the camera settings.
Using the color sensor
The color sensor enables you to measure and adjust the color accuracy of your computer display. Therefore,
a color image or graphic is rendered as close as possible to its original intent. The color profile for ThinkPad
computer displays is preinstalled on your computer. If you want to install a different color profile, go to:
http://www.lenovo.com/support
To use the color sensor, do the following:
• For Windows 7: Open the Start menu, click All Programs ➙ X-Rite ➙ PANTONE Color Calibrator , and
then follow the instructions on the screen.
• For Windows 10: Open the Start menu, click X-Rite ➙ PANTONE Color Calibrator , and then follow the
instructions on the screen.
When the color sensor is in use, the color-sensor indicator on the computer outer lid blinks twice at regular
intervals. When the color measuring and adjustment finishes, the color-sensor indicator stays on.
After you use the color sensor for the first time, a calibration profile
ECCM2SensorData.dat
is generated. Back
up this calibration profile on an external storage device in case that both the color sensor and the internal
storage device are replaced.
To locate the DAT file, do the following:
• For Windows 7 : Go to
C:\ProgramData\X-Rite\ECCM-2
.
• For Windows 10 : Go to This PC
➙
Documents
➙
X-Rite .
The display provides a color profile that can work with the Microsoft Image Color Management (ICM)
function. If the graphics software you are using is compatible with ICM, you can display a color image on
your monitor and match it with the same quality one on another device, such as a scanner or a printer.
For more information about the Microsoft ICM, see the Windows help information system.
Using an ExpressCard, a media card, or a smart card
Your computer has an ExpressCard slot and a media-card slot. Depending on the model, your computer
might also have a smart-card slot.
Chapter 2
.
Using your computer
33