Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 8 | Manualshive

Page: 8 / 1022

Lenovo NeXtScale nx360 M5 Installation And Service Manual Download Page 8

Antes de instalar este producto, lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

Safety statements

These statements provide the caution and danger information that is used in this documentation.

Important:

Each caution and danger statement in this documentation is labeled with a number. This number

is used to cross reference an English-language caution or danger statement with translated versions of the
caution or danger statement in the

Safety Information

document.

For example, if a caution statement is labeled

Statement 1

, translations for that caution statement are in the

Safety Information

document under

Statement 1

.

Be sure to read all caution and danger statements in this documentation before you perform the procedures.
Read any additional safety information that comes with your system or optional device before you install
the device.

vi

Lenovo NeXtScale nx360 M5 Installation and Service Guide

«
...
6
7
8
9
10
...
»

Summary of Contents for NeXtScale nx360 M5































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments