Lenovo Moto One Hyper
Level 2
– Service and Repair Manual
Lenovo Confidential Restricted:
PAGE 133
Do not share without consent from Lenovo
Finger Print Sensor Assembly
Description
Reference #
LENS,OTHR,Defender,Inlay, 3D, Iceberg Gr
LENS,OTHR,Defender,Inlay, 3D, Emerald Gr
LENS,OTHR,Defender,Inlay,3D,Terracotta G
LENS,OTHR,Defender,Inlay, 3D, Iceberg Gr
LENS,OTHR,Defender,Inlay, 3D,Terracotta
14
FINGERPRT SCANNER,ET520,iceberg,Kerr
FINGERPRT SCANNER,ET520,Magenta,Kerr
FINGERPRT SCANNER,Defender,ET520,Terraco
6
1.
Use fingers to place the Finger Print Flex
adhesive and peel off the liner on the location
as shown.
2.
Use fingers to place the Finger Print Sensor
adhesive and peel off the liner on the location
as shown.
3.
Use the Plastic Tweezer to place the Finger
Print Sensor on the Battery Inlay as shown.