51
Lenovo ideapad 510-15ISK/ideapad 510-15IKB
1120 LCD unit
For access, remove these FRUs in order:
• “1010 Hard disk drive” on page 32
• “1020 DIMM/PCI Express Mini Card slot cover” on page 34
• “1030 PCI Express Mini Card for wireless LAN” on page 35
• “1050 Optical disc drive” on page 38
• “1060 Keyboard bezel” on page 39
• “1070 ODD board” on page 41
• “1080 USB & audio board” on page 43
• “1090 System board” on page 45
• “1110 Battery pack” on page 50
Figure 12. Removal steps of LCD unit
Release the antenna cables from the cable guides and then remove the
screws
1
. Remove the LCD unit in the direction shown by arrow
2
.
1
1
1
1
2
Step Screw (quantity)
Color Torque
1
M2.5 × 4 mm, Phillips-head, nylok-coated (4)
HINGE BASE + D
Black 1.85±0.15 kgf.cm
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
• Make sure that the LCD connector is attached firmly and that you do not
pinch the antenna cables when you attach the LCD assembly. Route the
LCD cable along the cable guides.
