38
Lenovo ideapad 100S-11IBR Hardware Maintenance Manual
1050 Speakers
For access, remove these FRUs in order:
•
•
“1020 Battery pack” on page 34
Figure 5. Removal steps of speakers
Detach the speaker connector in the direction shown by arrow
1
and release
the cable from the cable guide. Remove the screws
2
. Then remove the
speakers in the direction shown by arrows
3
.
1
2
2
2
2
3
3
Step Screw (quantity)
Color Torque
2
M2 × 2.5 mm, Phillips-head, nylok-coated (4)
Speaker
Black
2.5±0.2Kgf
When installing:
•
Route the cables along the cable guides. As you route the cables, make sure
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.
• Make sure that the speaker connector is attached firmly.
