Lenovo Flex System x220, Installation And Service Manual

Page: 58 / 714

Table 4. IMM2 actions
Tab Selection Description
System Status The System Status page allows you to view system status, active system
events, and hardware health information. It provides quick links to the Server
Power Actions, and Remote Control functions of the Server Management
tab, and allows you to view an image of the last operating-system-failure
screen capture.
Event Log The Event Log page displays entries that are currently stored in the IMM
event log. The log includes a text description of system events that are
reported, including information about all remote access attempts and
configuration changes. All events in the log are time stamped, using the
IMM2 date and time settings. Some events also generate alerts, if they are
configured to do so. You can sort and filter events in the event log and
export them to a text file. Events
Event Recipients The Event Recipients page allows you to manage who will be notified of
system events. It allows you to configure each recipient, and manage
settings that apply to all event recipients. You can also generate a test event
to verify notification feature operation.
Service and
Support Download Service
Data The Download Service Data page creates a compressed file of information
that can be used by Support to assist you.
Server Firmware The Server Firmware page displays firmware levels and allows you to
update the IMM2 firmware, compute node firmware, and DSA firmware. Server
Management
Remote Control The Remote Control page allows you to control the compute node at the
operating system level. It provides access to both Remote Disk and Remote
Console functionality. You can view and operate the compute node console
from your computer, and you can mount one of your computer disk drives,
such as the CD-ROM drive or the diskette drive, on the compute node.
When you have mounted a disk, you can use it to restart the compute node
and to update firmware on the compute node. The mounted disk appears
as a USB disk drive that is attached to the compute node.
Server Properties The Server Properties page provides access to various properties, status,
and settings for your compute node:
• The General Settings tab displays information that identifies the system
to operations and support personnel.
• The LEDs tab displays the status of all system LEDs. It also allows you to
change the state of the location LED.
• The Hardware Information tab displays compute node vital product data
(VPD). The IMM2 collects compute node information, compute node
component information, and network hardware information.
• The Environmentals tab displays voltage and temperature information for
the compute node and its components.
• The Hardware Activity tab displays a history of Field Repeatable Unit
(FRU) components that have been added to or removed from the system.
Server Power
Actions The Server Power Actions page provides full remote power control over
your compute node with power-on, power-off, and restart actions.
Disks
The Disks page displays the status of hard disk drives in the system. You
can click on a drive name to display active events for the hard disk drive.
Processors The Processors page displays the microprocessors in the system, along with
their status and rated speed. You can click on a microprocessor name to
display events and additional hardware information for the microprocessor.
Server Timeouts The Server Timeouts page allows you to manage compute node start
timeouts to detect and recover from compute node hang occurrences.
Server
Management
50
Flex System x220 Compute Node Installation and Service Guide