Lenovo Flex System x220, Installation And Service Manual

Page: 40 / 714

asu set SYSTEM_PROD_DATA.SysEncloseAssetTag
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
[–user
userid
][–password
password
]
where aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is the 33-character asset tag number of the compute
node.
Remotely over a LAN
If you omit any optional parameter, the default value is used.
To update the UUID, in the ASU command-line interface, enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoUUID
uuid
–host
ipaddress
[–user
userid
][–password
password
]
where:
uuid
is the user-assigned hexadecimal value, up to 16 bytes, that identifies the compute node.
ipaddress
is the external LAN IP address of the IMM2.
userid
is the IMM2 account name (1 of 12 accounts). The default is USERID.
password
is the IMM2 account password (1 of 12 accounts). The default is PASSW0RD (with a zero, not the
letter O).
To update the DMI/SMBIOS data, complete the following steps:
Step 1. In the ASU command-line interface, enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoProdName
xxxxyyy
–host
ipaddress
[–user
userid
][–password
password
]
where:
xxxx
is the 4-digit machine type of the compute node.
yyy
is the 3-digit model number of the compute node.
ipaddress
is the external LAN IP address of the IMM2.
userid
is the IMM2 account name (1 of 12 accounts). The default is USERID.
password
is the IMM2 account password (1 or 12 accounts). The default is PASSW0RD (with a zero,
not the letter O).
Step 2. Enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoSerialNum
zzzzzzz
–host
ipaddress
[–user
userid
][–password
password
]
where zzzzzzz is the 7-character serial number of the compute node.
Step 3. Enter the following command:
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
–host
ipaddress
[–user
userid
][–password
password
]
32
Flex System x220 Compute Node Installation and Service Guide