Lenovo Flex System EN4023, User Manual

Page: 41 / 74

Introduction 29
Configuring the switch
2
FIGURE 18 Component IP Configuration page
For IPv6
1. Install the Lenovo Flex System EN4023 10Gb Scalable Switch in the appropriate bay of the
Lenovo Flex System chassis. For more information, see “Installing the switch” on page 10.
2. Log in to the CMM using the following default user name and password settings:
User ID: USERID
Password: PASSW0RD (wherein the sixth character is a zero)
3. From the CMM GUI, navigate to Chassis Management > Component IP Configuration.
4. Select the I/O Module bay in which the switch is installed. The example in Figure 19 is using
“IO Module 3.”
The IP Address Configuration IO Module (for the selected bay) dialog box displays.
5. Select the IPv6 tab.
6. Complete the text fields as required, then click Apply.
7. Click Close to close the dialog box.