Lenovo E41-10 Hardware Maintenance Manual Download | Manualshive

Page: 20 / 86

background image

Lenovo E41-10/E41-15 Hardware Maintenance Manual

16

This chapter presents the following important service information:
• “Strategy for replacing FRUs” on page 16

– “Strategy for replacing a hard disk drive” on page 17
– “Important notice for replacing a system board” on page 17

• “Important information about replacing RoHS compliant FRUs” on page 18

Before replacing parts:

Make sure that all software fixes, drivers, and BIOS downloads are installed
before replacing any FRUs listed in this manual.

After a system board is replaced, ensure that the latest BIOS is loaded to the
system board before completing the service action.

To download software fixes, drivers, and BIOS, follow the steps below:
1. Go to http://support.lenovo.com.
2. Enter the serial number or select a product or use Lenovo smart

downloading.

3. Select the BIOS/Driver/Applications and download.
4. Follow the directions on the screen and install the necessary software.

Important service information

Important:

BIOS and device driver fixes are customer-installable. The BIOS and device
drivers are posted on the customer support site:
http://support.lenovo.com.

Strategy for replacing FRUs

«
...
18
19
20
21
22
...
»

Summary of Contents for E41-10























































































Reviews:

No comments

Related manuals for E41-10

Brand: Krüger & Matz Pages: 25

Brand: HP Pages: 43

4320t - Mobile Thin Client

Brand: HP Pages: 92

2710p - Compaq Business Notebook

Brand: HP Pages: 58

Brand: HP Pages: 117

2730p - EliteBook - Core 2 Duo 1.86 GHz

Brand: HP Pages: 126

6530b - Compaq Business Notebook

Brand: HP Pages: 40

2730p - EliteBook - Core 2 Duo 1.86 GHz

Brand: HP Pages: 46

Brand: HP Pages: 55

Brand: HP Pages: 105

4710s - ProBook - Core 2 Duo 2.53 GHz

Brand: HP Pages: 157

Brand: HP Pages: 105

Brand: HP Pages: 104

Brand: HP Pages: 116

2730p - EliteBook - Core 2 Duo 1.86 GHz

Brand: HP Pages: 47

4710s - ProBook - Core 2 Duo 2.53 GHz

Brand: HP Pages: 6

Brand: HP Pages: 4

Brand: HP Pages: 99

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands