Lenovo BladeCenter HS22 Installation And User Manual Download | Manualshive

Page: 61 / 96

background image

The blade server operates as a symmetric multiprocessing (SMP) server, regardless of how many
microprocessors are installed. For optimum performance, you must upgrade the operating system to
support SMP. See Chapter 5 “Installing the operating system” on page 65 and your operating-system
documentation for additional information.

Input/output connectors and devices

Use this information to locate the input/output connectors and devices.

The input/output connectors that are available to the blade server are supplied by the BladeCenter unit. See
the documentation that comes with the BladeCenter unit for information about the input/output connectors.

The blade server has two selection buttons on the control panel: the media tray select button and the
keyboard/video/mouse select button. See “Blade server controls and LEDs” on page 11 for information
about these buttons and their functions.

The Ethernet controllers on the blade server communicate with the network through the Ethernet-compatible
I/O modules in the BladeCenter unit. Network signals to and from the blade server or any expansion cards
are automatically routed to a same-network-interface I/O module through circuitry in the BladeCenter unit.

Installing options

51

«
...
59
60
61
62
63
...
»

Summary of Contents for BladeCenter HS22

































































































Reviews:

No comments

Related manuals for BladeCenter HS22

Brand: Digital Equipment Pages: 15

Brand: Premio Pages: 2

Brand: Altos Pages: 104

SuperServer 6123L-8R

Brand: Supero Pages: 105

Ultra Enterprise 3000

Brand: Sun Microsystems Pages: 48

Brand: DataCard Pages: 2

APOGEE Ethernet Microserver 2100

Brand: Siemens Pages: 2

Brand: Siemens Pages: 38

Brand: Siemens Pages: 40

RUGGEDCOM RS401

Brand: Siemens Pages: 50

Brand: Siemens Pages: 101

Brand: Siemens Pages: 116

Brand: Siemens Pages: 143

HiPath Xpressions

Brand: Siemens Pages: 278

Advanced Server UNIX V4.0

Brand: Siemens Pages: 365

Brand: PCI Pages: 87

Brand: Wieland Pages: 42

DIRECTORY SERVER 7.1 SP7 - S

Brand: Red Hat Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands