Lenovo 7X59 Setup Manual Download Page 151

Page: 151 / 260

x8/x8/x8/x8 PCIe FH Riser Cage

Figure 47. x8/x8/x8/x8 PCIe FH Riser Cage Assembly

Table 22. Connectors in x16/x16 PCIe FH Riser Cage Assembly

Auxiliary power connector

PCI Express 3.0 x8 (slot 2/10)

Auxiliary power connector

PCI Express 3.0 x8 (slot 3/11)

PCI Express 3.0 x8 (slot 1/9)

PCI Express 3.0 x8 (slot 4/12)

Follow the instructions in “Install a 4U PCIe riser cage” on page 220 to install the option kit.

Dual-rotor fan module upgrade kit

See this section to identify parts that are enclosed in dual-rotor fan module upgrade kit.

Notes:

The following components require dual-rotor fan modules for proper cooling.

•  PMEMs
•  3DS RDIMMs
•  Processors with model name ending in

• Processors with 165 or more watts

This option kit comes with the following components.

Chapter 4

Server options

143

Summary of Contents for 7X59





































































































































































































































































Search results

Summary of Contents for 7X59

Reviews:

Brands by name

Popular brands

Lenovo 7X59, Setup Manual

Search results

Summary of Contents for 7X59

Reviews:

Brands by name

Popular brands