Lenovo 7X15, Setup Manual

Page: 77 / 104

1. Connect the USB cable of your mobile device to the Lenovo XClarity Administrator USB connector on
the front panel.
2. On your mobile device, enable USB tethering.
3. On your mobile device, launch the Lenovo XClarity Administrator mobile app.
4. If automatic discovery is disabled, click
Discovery
on the USB Discovery page to connect to the
Lenovo XClarity Controller.
For more information about using the Lenovo XClarity Administrator Mobile app, see:
http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxca.doc/lxca_usemobileapp.html
Update the firmware
Several options are available to update the firmware for the server.
You can use the tools listed here to update the most current firmware for your server and the devices that are
installed in the server.
• Best practices related to updating firmware is available at the following site:
– http://lenovopress.com/LP0656
• The latest firmware can be found at the following site:
–
http://datacentersupport.lenovo.com/products/servers/thinksystem/sn850/7X15/downloads
• You can subscribe to product notification to stay up to date on firmware updates:
–
https://datacentersupport.lenovo.com/tw/en/solutions/ht509500
UpdateXpress System Packs (UXSPs)
Lenovo typically releases firmware in bundles called UpdateXpress System Packs (UXSPs). To ensure that all
of the firmware updates are compatible, you should update all firmware at the same time. If you are updating
firmware for both the Lenovo XClarity Controller and UEFI, update the firmware for Lenovo XClarity Controller
first.
Update method terminology
•
In-band update
. The installation or update is performed using a tool or application within an operating
system that is executing on the server’s core CPU.
•
Out-of-band update
. The installation or update is performed by the Lenovo XClarity Controller collecting
the update and then directing the update to the target subsystem or device. Out-of-band updates have no
dependency on an operating system executing on the core CPU. However, most out-of-band operations
do require the server to be in the S0 (Working) power state.
•
On-Target update.
The installation or update is initiated from an Operating System executing on the
server’s operating system.
•
Off-Target update.
The installation or update is initiated from a computing device interacting directly with
the server’s Lenovo XClarity Controller.
•
UpdateXpress System Packs (UXSPs)
. UXSPs are bundled updates designed and tested to provide the
interdependent level of functionality, performance, and compatibility. UXSPs are server machine-type
specific and are built (with firmware and device driver updates) to support specific Windows Server, Red
Hat Enterprise Linux (RHEL) and SUSE Linux Enterprise Server (SLES) operating system distributions.
Machine-type-specific firmware-only UXSPs are also available.
Chapter 4
.
System configuration
69