Lenovo 7D8J, Setup Manual, Page: 93 / 122

Figure 71. Installing a PCIe adapter
Step 4. Connect the PCIe adapter cables. For more information on RAID adapter cable routing, see
“Internal cable routing” on page 19.
Install the CMOS battery (CR2032)
Consider the following when replacing the CMOS battery in the server:
• When replacing the CMOS battery, you must replace it with another CMOS battery of the same type from
the same manufacturer.
• After replacing the CMOS battery, make sure to reconfigure the server and reset system date and time.
• To avoid possible danger, make sure to read and follow the safety statements.
• Lenovo has designed this product with your safety in mind. The CMOS battery must be handled correctly
to avoid possible danger. If you install the CMOS battery, do adhere to the following instructions.
Note:
In the U. S., call 1-800-IBM-4333 for information about battery disposal.
• If you replace the original CMOS battery with a heavy-metal battery or a battery with heavy-metal
components, be aware of the following environmental consideration. Batteries and accumulators that
contain heavy metals must not be disposed of along with normal domestic waste. They should be taken
back free of charge by for recycle or proper disposal by the manufacturer, distributor, or representatives.
Chapter 3
.
Server hardware setup
89