Lenovo 70LU, User Manual And Hardware Maintenance Manual

Page: 82 / 142

Figure 58. Memory module installation order
Removing the memory module
To remove a memory module, do the following:
1. Prepare your server. See “Preparing your server and removing the server cover” on page 41.
2. Lay the server on its side for easier operation.
3. Locate and remove the memory module. Open the retaining clips and gently pull the memory module
out of the memory slot.
xxx xxxx xxx-xxxxx-x-x-xx-xx
xxxxxxxxxxxxx-xx xx xx xxxx
Figure 59. Removing a memory module
4. If you are instructed to return the old memory module, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
Installing the memory module
Note: Ensure that you follow the memory module installation rules when performing the operation. See
“Memory module installation rules” on page 69.
To install a memory module, do the following:
1. Prepare your server. See “Preparing your server and removing the server cover” on page 41.
2. Lay the server on its side for easier operation.
3. Locate the memory slot on the system board and remove the memory dummy if necessary.
70
ThinkServer TS150 User Guide and Hardware Maintenance Manual