Lenovo 6241 Installation And Service Manual Download | Manualshive

Page: 99 / 1990

background image

Supported adapters and Features on Demand software

These topics describe adapters and Features on Demand software that is supported by the Lenovo System
x3850 X6 and x3950 X6.

The following topics list adapters supported by the server, grouped by type, and the Features on Demand
software that is available for the server.

Supported host bus adapters

Use this information for an overview of the type of host bus adapters that the server supports and notes
about the adapters.

The following table lists the host bus adapters that the server supports. For more information about installing
adapters, see “Installing an adapter” on page 83.

Table 21. Supported host bus adapters and information about the adapters.

Name of adapter

Notes

N2215 SAS/ SATA Host Bus
Adapter for System x

• This solid-state drive controller provides no RAID support. It helps provide

optimized performance for applications that do not need RAID support.

• Low profile adapter

• 12 Gb SAS/SATA Internal non-RAID adapter

• PCIe Gen 3 x8

• 8-port controller

For additional information about the supported adapters, see “Supported RAID adapters” on page 86,
“Supported ML2 (Ethernet) adapters” on page 88, and “Supported RAID cache cards” on page 87.

.

Installing optional devices

85

«
...
97
98
99
100
101
...
»

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 6241

Brand: Basalte Pages: 2

Brand: HYVE Pages: 22

Brand: Hi-flying Pages: 29

Absolute Stream

Brand: Ideon Audio Pages: 24

Brand: Sun Oracle Pages: 6

Brand: Avaya Pages: 84

301269U - Ethernet Disk Mini Home Edition 500 GB Network Attached Storage Hard...

Brand: LaCie Pages: 74

Brand: Gigabyte Pages: 120

PRIMERGY RX100 S7

Brand: Fujitsu Pages: 86

PRIMERGY RX1330 M1

Brand: Fujitsu Pages: 312

Primergy RX100 S4

Brand: Fujitsu Pages: 85

PRIMERGY RX1330 M1

Brand: Fujitsu Pages: 84

Primergy RX100 S3

Brand: Fujitsu Pages: 73

PRIMERGY RX100 S8

Brand: Fujitsu Pages: 82

PRIMERGY RX1330 M3

Brand: Fujitsu Pages: 342

PRIMERGY RX100 S7

Brand: Fujitsu Pages: 490

PRIMERGY RX1330 M3

Brand: Fujitsu Pages: 84

Brand: QNAP Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands