manualshive.com logo in svg

Lenovo 6241, Installation And Service Manual

The Lenovo 6241 User Manual is the perfect companion for this powerful device. Find detailed instructions, tips, and troubleshooting advice in this comprehensive guide. Download the manual for free at manualshive.com to unlock the full potential of your Lenovo 6241 and optimize your user experience.

Share
Download
background image

b.  Select your keyboard layout and country.

c.  View the overview to learn about ServerGuide features.

d.  View the readme file to review installation tips for your operating system and adapter.

e.  Start the operating-system installation. You will need your operating-system USB DVD.

ServerGuide features

This topic provides an overview of the ServerGuide program features.

Features and functions can vary slightly with different versions of the ServerGuide program. To learn more 
about the version that you have, start the 

ServerGuide Setup and Installation 

USB DVD and view the online 

overview. Not all features are supported on all server models.

The ServerGuide program performs the following tasks:

•  Sets system date and time
•  Detects the RAID adapter or controller and runs the SAS/SATA RAID configuration program
•  Checks the microcode (firmware) levels of a ServeRAID adapter and determines whether a later level is 

available from the DVD

•  Detects installed hardware options and provides updated device drivers for most adapters and devices
•  Provides diskette-free installation for supported Windows operating systems
•  Includes an online readme file with links to tips for your hardware and operating-system installation

Setup and configuration overview

This topic provides an overview of how you can use the ServerGuide program to setup and configure the 
server.

When you use the 

ServerGuide Setup and Installation 

USB DVD, you do not need setup CDs. You can use 

the DVD to configure any supported server model. The setup program provides a list of tasks that are 
required to set up your server model. On a server with a ServeRAID adapter or SAS/SATA controller with 
RAID capabilities, you can run the SAS/SATA RAID configuration program to create logical drives.  

Note:

Features and functions can vary slightly with different versions of the ServerGuide program.

Typical operating-system installation

This topic provides information about a typical operating-system installation.

The ServerGuide program can reduce the time it takes to install an operating system. It provides the device 
drivers that are required for your hardware and for the operating system that you are installing. This section 
describes a typical ServerGuide operating-system installation.

Note:

Features and functions can vary slightly with different versions of the ServerGuide program.

1.  After you have completed the setup process, the operating-system installation program starts. (You will 

need your operating-system DVD to complete the installation.) 

2.  The ServerGuide program stores information about the server model, service processor, hard disk drive 

controllers, and network adapters. Then, the program checks the DVD for newer device drivers. This 
information is stored and then passed to the operating-system installation program.

3.  The ServerGuide program presents operating-system partition options that are based on your operating- 

system selection and the installed hard disk drives.

4.  The ServerGuide program prompts you to insert your operating-system DVD and restart the server. At 

this point, the installation program for the operating system takes control to complete the installation.

122

System x3850 X6 and x3950 X6 Installation and Service Guide

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 6241

IBM 150 User Reference Manual preview
150
Brand: IBM Pages: 180
Patton electronics 3120 Administrator'S Reference Manual preview
3120
Brand: Patton electronics Pages: 331
Synology CS407 Quick Installation Manual preview
CS407
Brand: Synology Pages: 15
Valcom VIP-201 Specification preview
VIP-201
Brand: Valcom Pages: 4
IBM Eserver 345 Series Option Installation Manual preview
Eserver 345 Series
Brand: IBM Pages: 70
Kathrein SAT-IP EXIP 418 User Manual preview
SAT-IP EXIP 418
Brand: Kathrein Pages: 16
Vxl Itona E21S Specifications preview
Itona E21S
Brand: Vxl Pages: 2
Tangent Thin Client 166 Datasheet preview
Thin Client 166
Brand: Tangent Pages: 2
Rasilient ApplianceStor 75 User Manual preview
ApplianceStor 75
Brand: Rasilient Pages: 24
Lava Lava DATATAP-IP Specifications preview
Lava DATATAP-IP
Brand: Lava Pages: 2
NEC Express5800 120Ed Release Note preview
Express5800 120Ed
Brand: NEC Pages: 8
NEC Express320F Brochure & Specs preview
Express320F
Brand: NEC Pages: 2
NEC Express5800 320La Release Note preview
Express5800 320La
Brand: NEC Pages: 18
NEC Express5800 120Lh Release Note preview
Express5800 120Lh
Brand: NEC Pages: 6
NEC EXPRESS5800/120Rd-1 Service Manual preview
EXPRESS5800/120Rd-1
Brand: NEC Pages: 70
NEC Express5800/1080Rf Brochure & Specs preview
Express5800/1080Rf
Brand: NEC Pages: 12
NEC EXPRESS5800/120Ed User Manual preview
EXPRESS5800/120Ed
Brand: NEC Pages: 138
NEC EXPRESS5800/120Ef Service Manual preview
EXPRESS5800/120Ef
Brand: NEC Pages: 64

Brands by name

Popular brands

Load more brands