Lenovo 5468 Page 15 Setup Manual Download

Page: 15 / 90

•

RAID setup

. Use this function to configure RAID for the server. It provides an easy-to-use graphical

wizard that supports a unified process for performing RAID setup for a variety of RAID adapters. You can
also perform advanced RAID configuration from the UEFI Setup.

•

OS installation

. Use this function to deploy an operating system for the server with an easy-to-use

Guided Install mode. Operating systems can be installed using unattended mode after you choose the
Operating System version and basic settings; the device drivers are installed automatically.

A Manual Install mode is also available. You can export the drivers from system, manually install the
operating systems, and then install the drivers. This way, you do not need to go to the web to download
device drivers.

Note:

In Guided Install mode, you can export the operating system installation settings to a response file

during operating system installation. Then, you can use the Import function under the Cloning menu to
apply the operating system installation settings to the target server.

•

Cloning

. Use this function to clone settings in one server to other similarly configured Lenovo servers.

–

Export

: Export UEFI, RAID, and BMC settings for the current server to files respectively and save the

files to a USB storage drive or a shared network folder.

–

Import

: Apply UEFI, RAID, BMC, and operating system installation settings to the target server by

using the files you have saved.

•

Diagnostics

. Use this function to view the overall health of devices installed in the server, collect logs for

RAID adapters, and perform diagnostics for hard disk drives and memory. You can also collect service
data that can be saved to a USB device and sent to Lenovo Support.

Note:

The service data collected by Lenovo XClarity Provisioning Manager does not include the operating

system logs. To collect the operating system logs and the hardware service data, use Lenovo XClarity
Essentials OneCLI.

Documentation for Lenovo XClarity Provisioning Manager is available at:

http://sysmgt.lenovofiles.com/help/topic/LXPM/LXPM_introduction.html

Lenovo XClarity Essentials

Lenovo XClarity Essentials (LXCE) is a collection of server management utilities that provides a less
complicated method to enable customers to manage Lenovo ThinkSystem, System x, and Thinkserver
servers more efficiently and cost-effectively.

Lenovo XClarity Essentials includes the following utilities:

• Lenovo XClarity Essentials OneCLI is a collection of several command line applications, which can be

used to:

– Configure the server.

– Collect service data for the server. If you run Lenovo XClarity Essentials OneCLI from the server

operating system (in-band), you can collect operating system logs as well. You can also choose to view
the service data that has been collected or to send the service data to Lenovo Support.

– Update firmware and device drivers for the server. Lenovo XClarity Essentials OneCLI can help to

download UpdateXpress System Packs (UXSPs) for your server and update all the firmware and device
drivers payloads within the UXSP.

– Perform miscellaneous functions, such as rebooting the server or rebooting the BMC.

To learn more about Lenovo XClarity Essentials OneCLI, see:

https://datacentersupport.lenovo.com/documents/LNVO-CENTER

Documentation for Lenovo XClarity Essentials OneCLI is available at:

Chapter 1

Introduction