Lenovo 5128, Serviceability Manual

Page: 7 / 22

Chapter 2. Configuration
After replacing the system board, update the default Vital Product Data (VPD) information and configure the
UEFI settings and HBA boot support for the Lenovo Storage DX8200N (5128) storage system.
Configuration tools
You can use the following configuration tools:
• Lenovo Advanced Setting Utility (ASU)
• IPMItool
Lenovo Advanced Setting Utility
ASU helps you to configure the UEFI settings with the command line.
For more information about the ASU, go to:
https://support.lenovo.com/documents/LNVO-ASU
IPMItool
IPMItool provides a simple command-line interface to Intelligent Platform Management Interface (IPMI)
enabled devices.
For more information about the IPMItool, go to:
https://support.lenovo.com/us/en/solutions/HT106995
Updating the default Vital Product Data information
You can use ASU and IPMItool to update the VPD information.
To change the machine type, use the following commands:
asu64 set SYSTEM_PROD_DATA.SysInfoProdName 5128A1C –host <IMM_HOST_IP> –user <USERID> –password
<PASSW0RD>
asu64 set SYSTEM_PROD_DATA.SysInfoProdIdentifier "Lenovo Storage DX8200N" –host <IMM_HOST_IP> –user
<USERID> –password <PASSW0RD>
ipmitool -I lanplus -H <IMM_HOST_IP> -U <USERID> -P <PASSW0RD> raw 0x3a 0x0c 0x0e 0x01 0x10 0x4c 0x65
0x6e 0x6f 0x76 0x6f 0x20 0x53 0x74 0x6f 0x72 0x61 0x67 0x65 0x20 0x44 0x58 0x38 0x32 0x30 0x30 0x4E
0x3a 0x20 0x20
In the command lines,
<IMM_HOST_IP>
represents IMM IP,
<USERID>
represents IMM user ID, and
<PASSW0RD>
represents IMM password.
Configuring the UEFI settings
For the quick steps of configuring the UEFI settings, see MT5128_UEFI_setting.readme and
MT5128_UEFI_setting.asu on the Lenovo Support Web site at:
http://datacentersupport.lenovo.com
You can use the following commands to configure the UEFI settings with ASU.
© Copyright Lenovo 2017 3