Lenovo 20MU, Hardware Maintenance Manual

Page: 44 / 109

Table 3. Error messages (continued)
Symptom or error FRU or action, in sequence
The battery installed is not supported by this system and
will not charge. Please replace the battery with the correct
Lenovo battery for this system. Press the ESC key to
continue. Replace the battery pack .
This system does not support batteries that are not
genuine Lenovo made or authorized. The system will
continue to boot, but may not charge unauthorized
batteries. Press the ESC key to continue.
Attention: Lenovo has no responsibility for the
performance or safety of unauthorized batteries, and
provides no warranties for failures or damage arising out
of their use.
Replace the battery pack .
Bottom cover tamper detection error System board
The non-volatile system UEFI variable storage is nearly
full. Note: This error indicates that the operating system or
programs cannot create, modify, or delete data in the
non-volatile system UEFI variable storage due to
insufficient storage space after POST.
The non-volatile system UEFI variable storage is used by
the UEFI BIOS and by the operating system or programs.
This error occurs when the operating system or programs
store large amounts of data in the variable storage. All
data needed for POST, such as BIOS setup settings,
chipset, or platform configuration data, are stored in a
separate UEFI variable storage.
Press F1 after the error message is displayed to enter
ThinkPad Setup. A dialog asks the user for confirmation
to clean up the storage. If the user selects “Yes”, all data
that were created by the operating system or programs
will be deleted except global variables defined by the
Unified Extensible Firmware Interface Specification. If the
user selects “No”, all data will be kept, but the operating
system or programs will not be able to create, modify, or
delete data in the storage.
If this error happens at a service center, Lenovo
authorized service personnel will clean up the non-volatile
system UEFI variable storage using the preceding
solution.
Beep errors
Lenovo SmartBeep technology enables you to decode beep errors with your smartphone when a black
screen occurs with beeps from your computer. To decode the beep error with Lenovo SmartBeep
technology, do the following:
1. Go to https://support.lenovo.com/smartbeep or scan the following QR Code.
38
A485 Hardware Maintenance Manual