Lenovo 1909, Installation And User Manual

Page: 67 / 141

Alignment
pins
Step 1. Before you begin, read “Safety” on page iii and “Installation guidelines” on page 23.
Step 2. Stand the blade server upright on a clean, flat work surface, with the scalability connector facing
up.
Step 3. Open the lower handle (rotate the lower handles down) to allow the blade server to sit flat on the
work surface.
Step 4. Using the 3/16" hex driver that comes with the 1-node speed burst card, loosen the nut that
attaches the 1-node speed burst card to the blade server.
Step 5. Lift the 1-node speed burst card off the blade server.
Completing the installation
To complete the installation, complete the following tasks.
Step 1. Assemble the scalable blade complex if necessary (see “Assembling a scalable blade complex” on
page 60).
Step 2. Install the IBM MAX5 expansion blade if necessary (see “Installing an IBM MAX5” on page 63).
Step 3. Close the blade server cover (see “Installing the blade server cover” on page 69).
Statement 21
CAUTION:
Hazardous energy is present when the blade server is connected to the power source.
Always replace the blade server cover before installing the blade server.
Step 4. Reinstall the blade server into the BladeCenter chassis (see “Installing a blade server in a
BladeCenter chassis” on page 70).
Chapter 3
.
Installing optional devices
59