Lenovo 1723-8BX, Installation And Maintenance Manual

Page: 56 / 80

Slide-rail front
d. Repeat steps to to attach the other outer slide-rail.
Installing the console unit in the rack
To install the console unit in the rack, complete the following steps:
Step 1. Extend the inner part of the outer slide-rails and slide them forward to the front of the outer rails.
Carefully slide the rollers on the console unit into the notch in the slide-rails as shown in the
illustration.
Step 2. Press in both release latches 1 ; then, grasp both sides of the console unit and push it completely
into the rack 2 . There will be resistance initially as the inner and outer rails are aligned. Pull the
console unit out halfway, and then push it back in to seat the console unit in the rails. Do this a few
times until the console unit moves smoothly in the rails.
46
1U 18.5-inch Standard Console Installation and Maintenance Guide