Replacing FRUs
54
Replacing the card reader
Attention
Do not open your computer or attempt any repairs before reading the
Important
Product Information Guide
.
1
Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the computer.
2
Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently
lay it down so that the screen is against the surface and the computer cover is facing up.
3
Remove the computer stand. For details, see
4
Remove the computer cover. For details, see
5
Remove the system board shield. For details, see
Replacing the system board shield.
6
Disconnect the card reader cable from the card reader.
7
Replace the card reader.
1
2
8
Reconnect the the card reader cable to the card reader.
9
Reinstall the removed parts and computer cover, and then reconnect the cables. For details,
see
