Replacing FRUs
64
Replacing the microprocessor
Attention
Do not open your computer or attempt any repairs before reading the
Important
Product Information Guide
.
Caution
The heat sink and fan assembly and microprocessor might be very hot. Before you
open the computer cover, turn off the computer and wait several minutes until the
computer is cool.
1
Remove the computer cover. For details, see
2
Remove the front bezel. For details, see
3
Remove the heat sink and fan assembly. For details, see
Replacing the heat sink and fan assembly.
4
Disconnect all cables connected to the system board.
5
Replace the microprocessor.
Note
• Your microprocessor and socket might look different from the one illustrated.
• Touch only the edges of the microprocessor. Do not touch the gold contacts
on the bottom.
•
Do not drop anything onto the microprocessor socket while it is exposed.
The socket pins must be kept as clean as possible.
1
2
