44
IdeaPad Y560 Hardware Maintenance Manual
Figure 7. Removal steps of fan assembly and heat sink assembly (continued)
Loosen two screws
5
to detach the fan assembly and the heat sink assembly.
a
b
c
5
5
When installing:
Before you attach the fan assembly to the computer, apply thermal grease,
•
at an amount of 0.2 grams, to the
a
b
part shown in the figure above. Either
too much or too less grease application can cause a thermal problem due
to imperfect contact with a component. In models with the discrete graphics
chip, there is an additional thermal rubber
c
whose film to be peeled off.