6
When the side switch is set to the
DOWN
position
it will turn off the internal fan and stops sending
data to the S40 Smart Thermostat. Setting the side
switch to the
UP
position will restore all functions.
An alert code 70003 is raised and will remain active
until the side switch is set back to the
UP
position.
The
SAQM
details screen will display the last
reading from the device before the switch was
changed to the
DOWN
position.
NOTE:
It could take 2-10 minutes to report ini-
tial air quality data after adding the smart
device to the smart devices network. The
farther the smart device is from the S40
Thermostat, the longer it may take.
Calculating Data
IMPORTANT
After adding the smart device to the smart
devices network, it will begin displaying
information from the Smart Air Quality Monitor
once there is a blower, cooling, or heating
demand. Until the first thermostat demand, the
thermostat's SAQM screen will indicate it is
calculating.
Figure 1. SAQM Calculating
