10
SELECT MODES
1.
HEAT/COOL
allows the thermostat to switch
between heating and cooling automatically.
2.
HEAT ONLY
allows only heating demand.
3.
COOL ONLY
allows only cooling demand.
4.
OFF
indicates system has been turned off.
5.
EMERGENCY HEAT
allows heat pump
system to use a secondary heat source to
come on and reach the desired user
temperature setting faster.
6.
SCHEDULES
(1, 2 or 3) See
Edit Schedules
on page 14 for customizing schedules).
7.
ON
,
AUTO
and
CIRCULATE
- Three fan
operation modes are available: ON, AUTO
and CIRCULATE. A green check mark
indicates the selected setting.
FAN OPERATION
In the
CIRCULATE
mode, the user can cycle the
fan for a programmed period of operation each
hour during periods when the heating or cooling
equipment is not running.
Table 2. Fan Operation
on
Fan is NOT following
the schedule and runs
continuously until it is
changed from the
se
lect mode
.
auto
Fan will follow the fan
setting in the selected
schedule.
circulate
Fan follows schedule
and cycles during
periods of equipment
inactivity.
Circulate off time
is
dependent on user
settings. See page 16
on how to set the
circulate off time.
