Lennox Hearth Products MONTECITO ESTATE MONTEST, Installation And Operating Instructions Manual, Page: 20 / 24

CHIMNEY - PARTS AND COMPONENTS LISTS
Secure Temp GX - 2” Insulated Galvanized Chimney System
(Recommended Insulated System)
Galvanized (7” ID & 11” OD) U.S.A. ONLY
Description Cat./Part No.
Lengths & Misc. Chimney Components
Length 8”, 7GXL8 7GXL8
Length 12”, 7GXL12 7GXL12
Length 18”, 7GXL18 7GXL18
Length 24”, 7GXL24 7GXL24
Length 24” (stainless steel exterior fl ue), 7XL24 7XL24
Length 36”, 7GXL36 7GXL36
Length 36” (stainless steel exterior fl ue), 7XL36 7XL36
Length 48”, 7GXL48 7GXL48
Length 48” (stainless steel exterior fl ue), 7XL48 7XL48
15º Elbow, 7GXE15 7GXE15
30º Elbow, 7GXE30 7GXE30
Rain Termination Cap, 7CC (stainless steel) 7CC
Wall Band, XBM XBM
Supports
Offset Support, XSO XSO
Roof / Floor support, XST XST
Roof Brace, XBS2 XBS2
Roof Flashings
Roof Flashing, Flat (includes spacer & collar), 7XF 7XF
Roof Flashing, Adjustable (5º to 30º) (includes spacer
& collar), 7XFA 7XFA
Roof Flashing, Adjustable (30º to 45º) (includes spacer
& collar), 7XFB 7XFB
Storm Collar (spacer included), 7XFC 7XFC
Firestops & Braces
Firestop, 7XBF 7XBF
Radiation shield, 7XRS 7XRS
Insulated attic radiation shield, 7XRSA 7XRSA
30º Insulated wall radiation shield, 7XRSMI30 7XRSMI30
Wall Band, XBM XBM
Installation Accessories
Description Cat./Part No.
Facades (Required - Order Separately)
Montecito Estate™ Facade Black, MEFBK
H4850
Montecito Estate Facade Brushed Nickel, MEFBN
H4851
Montecito Estate Facade Hammered Steel, MEFMC
H4852
Doors - (Required - Order Separately)
Montecito Estate Doors Black, MECBK
H4853
Montecito Estate Doors Brushed Nickel, MECBN
H4854
Montecito Estate Doors Hammered Steel, MECMC
H4855
Outside Air Kit (included with fi replace)
Outside Air Coupler To Connect Outside Air (UZI) To Fireplace,
UZIAD UZIAD
Outside Air Ducting - includes 4” insulated fl ex x 10’ long, UZI UZI
Gravity Kit
Gravity kit: Complete double duct system includes: 2 elbows 90º,
2 telescopic lengths, 2 grill supports & 2 black grills, 2 fi replace
adaptors.
7B30ZK-1
Gravity Kit Accessories
Black Grill With Support (set of 2) , 7B30ZO 7B30ZO
Brass Grill (for 7B30ZK-1) (set of 2), 7B30ZGB 7B30ZGB
Elbow 90º, 8” dia. I.D., 7B26ZE90 7B26ZE90
Elbow 45º, 8” dia. I.D., 7B26ZE45 7B26ZE45
Telescopic length, 8” dia. I.D. (15” to 26”), 7B26ZLA 7B26ZLA
Adjustable length, 8” dia. I.D. (2” - 5”), 7B26ZL2A 7B26ZL2A
Length fi ve (5) feet, 8KL5 8KL5
Length four (4) feet, 8KL4 8KL4
Length three (3) feet, 8KL3 8KL3
Length two (2) feet, 8KL2 8KL2
Length one (1) feet, 8KL1 8KL1
Fireplace Kits
Rigid fi rescreen, BTZN BTZN
Masonry Chimney Adaptor, 30º, BISTMA30
(for use with TUBINOX liner) BISTMA30
OPTIONAL INSTALLATION ACCESSORIES
Fireplace Model MONTEST - Approved Venting Components manu-
factured by Security Chimneys International only.
• 7” diameter chimney - ACBI (air cooled), Secure Temp™ GX (U.S.
only) and Secure Temp S-2100+ (or Nova Temp ).
• 7” diameter chimney for relining masonry chimneys - TUBINOX
chimney (or PROJET SS), 7” diameter with adaptor for installation
in a masonry chimney.
Notes:
1
Nova Temp™ is equivalent to S-2100+
2
Chimney Adaptor (S-2100+ / ) for CANADA ONLY - If you want to
install a S-2100+ / chimney, an adaptor is available (6UCA).
3
ACBI Chimney is NOT recommended at elevations above 4,000 or in cold
climates (climates where temperatures will fall below 32° F / 0° C). With the
ACBI chimney, you must use a starter section before installing the fi rst chimney
length (ACBI7SB or ACBI7SB30).
20