Lennox Hearth Products LENNOX MPE-33R Installation And Operating Instructions Manual Download Page 18

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

18

ACCESSORY COMPONENTS

The following items are available for use with 
this appliance.

Cat. No.  Model 

Description

H3430  GEP-33BL  Glass Enclosure Panel, Black on Bronze
H3433  GEP-33PB  Glass Enclosure Panel, Brass on Bronze
H3434  GEP-33BS  Glass Enclosure Panel, Stainless on Bronze

Cat. No.  Model 

Description

H3435 TK3-33BL 3-pc. Black Trim Kit, MPE-33R
H3436 TK3-33PB 3-pc. Brass Trim Kit, MPE-33R
H1932 TK3-33BS 3-pc. Stainless Trim Kit, MPE-33R

Cat. No.  Model 

Description

85L87 

FWSK 

Wall Switch Kit, White             

   

Wall Thermostat

The wall thermostat kit provides temperature 
control for optimum comfort.

Cat. No.  Model 

Description

89L36   

WTK 

Wall Thermostat Kit

Wall Switch Kit

Trim Kit

Glass Enclosure Kit

This kit contains trim panels used to fi nish the 
gaps between the wallboard or optional mantel 
and the fi replace, providing the appliance a 
fi nished built-in look. 

Cat. No.  Model 

Description

H1645 

PCK 

Power Cord Kit, 3-Prong, 110V

Power Cord Kit, 3-Prong, 110V

~83”

If a power cord is preferred instead of hard-
wiring the power supply to the fi replace, this 
optional power cord kit is available (110 Volt 
installations only).

    

  

These glass enclosure panels are a one-piece 
panel, which have a bi-fold “look” as shown 
below.

Cat. No.  Model 

Description

H3604  FFEP-33M  33" Decorative Complete Front Face, Mission Style
H3605  FFEP-33IA  33" Decorative Complete Front Face, Interlocking Arch

Summary of Contents for LENNOX MPE-33R





















Reviews: