Lenel LNL-3300-M5, Installation Manual

Page: 169 / 184

M Series Installation Guide
revision 7 —
169
48 Specifications
• Primary Power (from LNL-3300-M5): 12 VDC, ± 10 %, 36 mA maximum (plus reader current)
• Inputs: Two EOL values supported:
- 1K/1K ohm, 1%, 1/4 watt
- 6.8K/18K ohm, 5%, 1/4 watt
• Reader Interface:
-
Reader Power: 12 VDC, 300 mA maximum each reader port
- Reader LED Output: Open collector, 40 mA sink maximum
Reader Data Input: TTL compatible inputs
- Communication: 9600, 19200, 38400, or 115200 bps, asynchronous
• Cable Requirements:
- Outputs: As required for the load
- Reader Data: Use shielded cables; 12 VDC: 20 AWG, 500 ft. maximum, reader powered by
LNL-1320-2RP; 18 AWG, 3000 ft. maximum, reader powered locally
Notes: The above specifications are based on the typical 12 volt reader drawing 125 mA. Reader
power requirements vary between different models.
Excessive voltage drop on long cable runs may require a larger cable gauge or powering the
reader from a local power source. Refer to the power specification for the reader being
installed.
• Environmental:
- Storage Temperature: -67 to +185°F (-55 to +85°C)
- Operating Temperature: +32 to +158°F (0 to +70°C)
- Humidity: 5 to 95% RHNC
• Mechanical:
- Width: 3.5 in. (88.9 mm)
- Length: 10.25 in. (260.4 mm)
- Height: 0.69 in. (17.5 mm)
- Weight (without connectors): 3.7 oz (104 g) nominal