Lenel DirecDoor, Installation Manual

Page: 70 / 90

Controller Firmware Tools
70
DirecDoor Installation Guide
Primary Network Form – Static IP Address
DHCP :
1.
Select the Use DHCP check box.
2.
Identify the controller by doing one of the following:
•
Enter a name in the Controller Name field.
– or –
•
Select the Use MAC address check box.
The MAC address for your controller board is displayed in the MAC address field.
Note: Give the MAC address to your Network Administrator so that it can be added to the
DNS database.
3.
Click Save .
4.
If this completes your controller configuration, click Reset Controller .
Primary Network Form - Dynamic IP Address (DHCP)
Controller Parameters Menu > Secondary Network Form
Note: The DDSDC does not support the Secondary Network Form.
If controller has a Dual Network Interface Card (NIC) installed, a Primary Network tab and a
Secondary Network tab are available from the Controller Parameters menu.