LEMKEN Thorit 9 K, Operating Instructions Manual

Page: 16 / 49

14
3 COMPACT INSTRUCTIONS
The following instructions must be done to use the implement effective and
optimal.
3.1 Lower links and top link
The lower links must be arranged
so that they nearly intersect in the
middle between the front and rear
axle of the tractor.
The drawbar (A0) must be fitted in
the top position to ensure a good
entry.
In working position the top link must
be fitted so that it raises towards
the implement.
Incorrect Correct
3.2 Working depth of the tines
The working depth will be adjusted by means of the pins (S1) and (S2) of the
pin adjuster (V1). Range of working depth = 5 cm to 30 cm.
3.3 Reconsolidation effect
The reconsolidation effect of the rollers (W0) will be adjusted via the position
of the top link. The top link should be positioned slightly raised towards the