LELY 5.4001.0010.1, Manual

Page: 50 / 70

System operation
Chapter 4 - page 10
4
D-H00
2
.0
607E
N
4.3.3 "Test" menu
The "Test" menu consists of the following submenus:
"Test > Test motors" menu item
This submenu lets you read information such as:
a) Dutyc = power value (left and right motor) on a scale of 0 to 1000
b) Set v = speed selection (left and right motor) in mm/s
c)
Speed = read current wheel speed (left and right) in mm/s
d) Encx = pulse value (left and right motor)
e) Ia = charging current value (ADC value)
f)
UI = distance according to ultrasound sensor in mm
g) VA = battery voltage in mV
h) Gy = gyroscope value in degrees
i)
R = right motor selection
j) L = left motor selection
k)
↑
= forward direction of travel
l)
↓
= reverse direction of travel
NOTE
• An input selection on the E-link manual control is shown as a grey cross-hatched block.
Figure 4 5 "Test" flow diagram