5
2.4 Setting up your Leitner Handset Lifter (optional)
• Follow instructions in section 2 .3 before moving onto the next step
• Attach the handset lifter to your telephone as shown in its user guide
• Connect the handset lifter to the red AUX jack located on the back of the
headset base
• Ensure that the accessory selection switch on the bottom of your base is set to RHL
• Want to see the setup video? Go to headsets .com/LifterSetup
2.5 Setting up your Leitner Electronic Hookswitch (EHS) Cable (optional)
• Connect the EHS cable to your telephone as shown in its user guide
• Connect the EHS cable to the AUX and TEL jacks on the back of the charging base
• Refer to the user guide for the EHS cable for the correct setting of the Accessory
selection switch
With the handset lifter or EHS cable connected, you will be able to answer and end calls
using the ON/OFF button located on the headset — up to 350 feet away from your desk
*We’d love to help you get set up! Call us at 1-800-432-3738, Mon-Fri 6:00am-4:30pm Pacific Time
Summary of Contents for SmartSet 370
Page 1: ... SmartSet 370 Manual ...
