4
2. Setup
2.1 Activating and charging the battery
• Carefully remove the tab from the headset to activate the battery . Plug one end of
the power supply into the power jack on the back of the charging base and the
other end into a working power outlet
• We recommend charging your headset for at least 4 hours before the first use
2.2 Connecting to a telephone with a headset jack
• Using the included green phone cord, connect the Telephone connector jack on
the back of the charging base to the headset jack on your desk phone
• You may need to adjust the compatibility switch located on the bottom of the base .
Cisco phones should be set to 4 . Most other phones use 1*
2.3 Connecting to a telephone without a headset jack
• Unplug the curly cord of your handset from the base of your office phone
• Connect the curly cord to the handset jack on the charging base
• Plug one end of the included green phone cord into the green Telephone
Connector jack on the back of headset base
• Plug the other end of the green telephone cord into to the handset jack of your
desk phone
• You may need to adjust the compatibility switch located on the bottom of the base .
The most common setting is 1*
*We’d love to help you get set up! Call us at 1-800-432-3738, Mon-Fri 6:00am-4:30pm Pacific Time
Summary of Contents for SmartSet 370
Page 1: ... SmartSet 370 Manual ...
