Rev. A 1-2-2015
PAGE 1 OF 2
BEFORE INSTALLATION
1) READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.
2) CLEAN INSTALATION AREA
3) MAKE SURE ALL TOOLS ARE AVAILABLE FOR INSTALL.
APPLICABLE MODELS:
ALL
Leitner Designs
25675 Taladro Circle Unit E
Mission Viejo, CA 92691
www.leitnerdesigns.com
TORQUE WRENCH
WITH 13MM DEEP
SOCKET
ACS
Roof Top Tent Bracket instructions
1
PACKAGE CONTENTS
REMOVE CROSS BAR PAD AND ADJUSMENT KNOBS
1)
REMOVE THE ENCAP AND RUBBER PAD FROM THE
CROSS BAR EXTRUSION. (FIG 1)
2)
REMOVE THE FOUR ADJUSTMENT KNOBS AND
REPLACE WITH THE FOUR M8 LOCKNUTS SUPPLIED
IN KIT. MAKE SURE THE CROSS BEAMS ARE AS FAR
APPART AS POSSIBLE. TIGHTEN M8 LOCK NUTS TO
16 LB-FT (FIG 2)
M8 X 20 cap screw
(QTY.4)
M8 T-Bolt
(QTY.8)
M8 locknut
(QTY.16)
RTT Bracket
(QTY.4)
TOOLS REQUIRED
(fig 1)
(fig 2)
