Leisure's Edge LE 744, Owner'S Manual

Page: 27 / 59

Page 25
For HELP, call 727.573.9611
SPA FROG START UP: After you have filled and balanced the water in your hot
tub according to the chart in Table 4, proceed with the SPA FROG as follows:
*NOTE: Bromine levels are lower only when used with FROG minerals. Use a
metal out or sequestering agent if fill water is high in metals. Wait 24 hours
before continuing start up. Shock hot tub to establish a 1.0-2.0 ppm bromine or
chlorine residual. Add directly to hot tub water. Do NOT add through the SPA
FROG In-Line System. When spa reaches 95 degrees, set the mineral and
bromine cartridges according to the directions below and insert them into the
System.
Test Range
Total Alkalinity 80-180 ppm
pH 7.2-7.8
Calcium Hardness 150-400 ppm
Bromine 1.0-2.0 ppm
Table 4 - Recommended Ranges
for Balanced Water Using Spa Frog
Note: Test strips and
water balancing chemicals
are available by calling
800.749.8003 or visiting
www.hottubparts.com