44
11. UNIROOF 700 Warning and error messages
Message type
Display
Error code
Description and measures
Warning
---
Example warning symbol in the status
display (33).
Supply voltage is too high At the same
time, the red backlight of the LCD mod-
ule is switched on alternately
Error
0008
Error symbol and text of note (Error No.
0008/Excessive temperature) in the
work display.
Solution: Let the device cool down
If there is a warning pending, you can still continue to work largely without restrictions.
In contrast to the warning message, it is
not possible to continue working once an error message has
appeared.
The heating is switched off automatically and the drive is blocked. The corresponding error code is
immediately displayed in the working display (41).
Concrete information regarding the type of error or the warning can be called up at any time, including via the
menu Settings under Show Warnings.
In the menu, select the menu item Warnings by press-
ing the
Minus (32)
button. Then press the
Confirm (33)
button.
All warnings are now displayed.
Select the
General Info
menu item in the menu by
pressing the
Minus (32)
button. Then press the
Con-
firm (33)
button.
The following information is displayed:
• Software version HMI and PCU
• Production date of the machine
• Serial number
10.12 General information
Summary of Contents for UNIROOF 300
