33
To switch on data recording, press the
Confirm (33)
button.
Select the
LQS
menu item in the menu by pressing the
Minus (32)
button. Then
press the
Confirm (33)
button.
10.6 Settings for LQS data recording
After the standby timer has expired without activity, the cooling process is initiated.
You can interrupt the process with the
Heating On/Off (31)
button.
If you have activated Eco Mode and the device remains inactive for the set period of
time, you will automatically switch to standby mode. The air volume is automatically
reduced to 45%. In the working display (41), the standby mode is displayed with the
corresponding symbol.
Switched off at the factory
You can activate Eco Mode by pressing the
Confirm (33)
button.
You can set the desired time interval individually by selecting the value to be adjust-
ed with the
Minus/Plus (32)
buttons. Press the
Confirm (33)
button. You can now
set the value individually with the
Minus/Plus (32)
buttons. To accept the set value,
press the
Confirm (33) button again.
10.5 Eco mode
Summary of Contents for UNIROOF 300
