24
Drive
The LED display on the
Drive "On/Off" key (39)
shows the condition of the drive.
Heating and drive
If the two LED displays for the
Heating "On/Off" (40) key
and the
Drive "On/Off" (39) key
flash simultaneously,
an error is active (
see Chapter Warning messages and error messages (UNIPLAN 300) 28 [11]
Hold down the
Drive "On/Off" (39)
and
Heating "On/Off" (40)
keys and turn on the
device using the
main switch (11)
. "UNIT" then appears on the display.
Press the
Confirm key (42)
to confirm and use the
Plus/Minus
keys
(41/43)
to set the
desired units.
Press the
Confirm key (42)
to confirm and use the
Plus
key
(41)
to select "SAVE". Press
the
Confirm key (42)
to confirm; the units are then saved.
The device then restarts automatically.
The units for the welding speed and for the temperature can be adjusted.
Temperature:
°C or °F
Speed:
m
min
or
ft
min
Setting the parameter units
LED status
Drive On/Off (37)
Condition
LED display off
Drive is turned off
LED display continuously
green
Drive is turned on
