15
Under Duty Info you will find information regarding the runtime of your UNIPLAN 500.
Use the
"e-Drive" (31)
to access the "Settings" menu and confirm your selection. Now use the
"e-Drive" (31)
to
set the "Advanced Mode" to "On" and then select "Duty Info".
Drive hours:
Current runtime of the drive
Blower hours:
Current runtime of the blower
Machine hours:
Current runtime of the machine
Day distance:
Distance covered since last reset (must be reset manually)
Total Distance:
Distance covered since commissioning of the device
Duty Info (only in Advanced Mode)
Under "General Info" you will find version information regarding the software in addition to
information regarding the date of production.
Use the
"e-Drive" (31)
to access the "Settings" menu and confirm your selection. Use the
"e-Drive" (31)
to set the "Advanced Mode" to "On" and then select "General Info".
Warnings are displayed as they arise in the
status display area 2 (35)
. The "Warnings"
menu indicates which malfunction has occurred. Once the malfunction has been rectified,
the entry disappears.
Use the
"e-Drive" (31)
to access the "Settings" menu and confirm your selection. Use the
"e-Drive" (31)
to set the "Advanced Mode" to "On" and then select Warnings.
Use the
"e-Drive" (31)
to access the "Settings" menu and confirm your selection. Use the
"e-Drive" (31)
to set the "Advanced Mode" to "On" and then select "Machine Setup".
Unit
: Setting the system's units (metric or imperial) for Unit Speed and Unit Heat.
LCD Contrast
: Adjusting the LCD display contrast
LCD Backlight
: Adjusting the LCD display background illumination
Key Backlight
: Adjusting the keyboard's background illumination on the
control panel (4)
General Info (only in Advanced Mode)
Warnings (only in Advanced Mode)
Machine Setup (only in Advanced Mode)
