7
Leister IGNITER
Hot-air blower
Built-in unit for pellet and wood chip heaters
Application
Please read operating instructions carefully before use
and keep for future referen
Operating Instructions
(Translation of the original operating instructions)
GB
Opening the device is
extremely dangerous
, since live parts and connections are
exposed. The device must be fully disconnected from the mains before opening it.
Caution: external voltage.
Danger of fire and explosion
if hot-air welding devices are used incorrectly,
especially in the vicinity of flammable materials and explosive gases.
The
nominal voltage
indicated on the device must correspond to the mains voltage.
Danger – can cause burns!
Do not touch the heating element tube when
hot.Allow the device to cool down.
Do not direct hot-air stream towards people or animals.
230
400
Warning
Caution
Keep away from wet and damp areas.
The device
must be monitored
during operation. Heat can reach combustible
materials which are out of sight.
The device may only be used by
trained personnel
or under their supervision.
Children may not use the device under any circumstances.
Heating element tube
Electrical connections
Hose connection
Inner thread
Assembly support area
Summary of Contents for Igniter BM4
Page 63: ......
