Leister Forte S3 Operating Instructions Download Page 1

Page: 1 / 4

LEISTER Forte S3
Hot Air Blower

Please read operating instructions carefully
before use and keep for further reference.

•

Shrinking

of shrink-hoods and films used in packaging goods of all types.

•

Drying

of water-damp surfaces.

•

Heating-up

for forming, bending and sealing of thermoplastic semi-

finished materials.

•

Defrosting

of frozen water pipes.

•

Activating

single or multi-component adhesives.

•

Removing

old shellac, oil, resin paints and underseals on vehicles.

OPERATING INSTRUCTIONS

APPLICATION

LEISTER Process Technologies, Riedstrasse, CH-6060 Sarnen / Switzerland

Tel. + 41 41 662 74 74 Fax + 41 41 662 74 16

www.leister.com [email protected]

Официальные

поставки

www.mikst.ru

Summary of Contents for Forte S3

Page 1: ...Heating up for forming bending and sealing of thermoplastic semi finished materials Defrosting of frozen water pipes Activating single or multi component adhesives Removing old shellac oil resin pain...

Page 2: ...ed Incorrect use of hot air tools can present a fire and explosion hazard particularly in the proximity of flammable materials and explosive gases The tool must be operated under supervision Heat can...

Page 3: ...2 and allow to warm up for about 1 min Rest tool on heat resistant surface Make sure no objects or obstacles stand in the way of the air outlet because of the fire hazard The Leister Company as well a...

Page 4: ...pecifications are subject to change without prior notice Your authorized Service Centre is MAINTENANCE SERVICE AND REPAIRS The carbon brushes of the welding tool s motor should be checked after about...