IMPORTANT
Watch the Online
Instructional Video
in the Support Section
at www.leighjigs.com
Step 13
Two hose adaptors, 2" (51mm) and 2 1/2" (63.5mm), are included with the
VRS1200.
Step 14
When routing, the VRS1200 beam should be moved closer to the workpiece
for maximum chip collection. The tabs
A
on either side of the vacuum box should be
close to, but not touching the workpiece. The guide bushing mounted to the router
base is positioned between the tabs of the dust collector.
Step 15
As the router moves across the beam, in and around the fingers, the guide bushing
attached to the router base contacts the vacuum box tabs
A
and moves it across the beam.
The vacuum box is always positioned for maximum dust collection.
Step 12
The swivel action vacuum port accepts a 11/2" (38mm) diameter hose
.
Attach
your shop vacuum hose to the dust collection port on the vacuum box assembly.
Leigh Router Joinery Jigs
2" (51mm)
Adaptor
2-1/2" (63.5mm)
Adaptor
Step 2
To do the
one-time setup
, start by loosening the jigs template knobs
A
and
raise the template about 1". Loosely tighten the knobs to hold the template in place.
A
A
Step 1
Watching the online video in addition to reading this user guide will reduce
your learning time dramatically. The video can be streamed to your smart phone or
tablet and used in your shop as a visual reference. Visit leighjigs.com and find the video
in the Support section.
A
A
Customer Support
1-800-663-8932 [email protected]
See Online Installation & Setup Video at www.leighjigs.com
Leigh Router Joinery Jigs
Printed in China
© 2018 Leigh Industries Ltd. All rights reserved. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
recording, or otherwise, without the prior written permission of Leigh Industries Ltd.
Leigh Industries Ltd. is not an authorized dealer, distributor or service provider or otherwise
affiliated or associated with Porter Cable. 10/2018
Dovetail Jig Vacuum & Router Support
VRS1200
Fits Porter Cable 4210, 4212 & 4216
Installation & Setup Guide
For a list of Leigh dealers, visit www.leighjigs.com
US Patent No.7,507,060 B2 UK Patent No.GB2446909 Canada Patent No. 2,611,233
A
A
PART DESCRIPTION
PART NO.
QUANTITY
A
VRS1200 Beam Extrusion with Decals
426105
1
B
Left Support Bracket
426175
1
C
Right Support Bracket
426180
1
D
Support Bracket Set Screw 1/4"- 20 x 1/2”
426185
2
E
Left End Cap with Spring
426220
1
F
Right End Cap with Spring
426225
1
G
End Housing Screw No.8 - 32 x 1"
426190
2
H
Support Bracket Knob
426207
2
I
Support Bracket Nut 3/8"- 16
426208
2
J
Vacuum Box Assembly
426230
1
K
2" (51mm) Vacuum Box Hose Adaptor
426150
1
L
2-1/2" (63.5mm) Vacuum Box Hose Adaptor
426155
1
M
Hex Key
426216
1
N
Fully Illustrated Setup guide
426240
1
A
B
C
D
E
F
M
G
H
I
J
K
L
D
G
H
I
N
